This was the first 75mm HDZero BNF released by Happymodel. It runs on 2S or 3S, and is only available in FRSKY edition at this point, as it has been discontinued.
Here's the original description:
HDZero has officially teamed up with Happymodel to bring you another top-of-the-line competitor in the 75mm brushless whoop lineup... the HDZero Mobula7!
This FPV Racing whoop is equipped with built-in ExpressLRS capabilities, as well as a RunCam HDZero Nano Camera and the all-new HDZero Whooop VTX for a smooth and powerful flight!
Specifications:
Brand Name: HDZERO and HappyModel Co-branded
Model: Mobula7 HDZERO
Frame wheelbase: 75mm
Weight: 41gram without battery
Size: 98mm*98mm*50mm
Radio Link System required: ExpressLRS 2.4GHz TX module 2.0 ELRS firmware
Compatible with 2S-3S Lipo battery or Lihv battery
Recommend Battery: 2S 300/350/450/550/650 mAh
3s 300/350/450 mAh
Battery Plug: XT30
Battery holder tray size: 17mm*13mm
Flight controller | MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Mount pattern: 25.5×25.5 M2 Power supply: 2-4S Lipo battery Built-in 12A Blheli_s ESC each Built-in Betaflight OSD(SPI Control) Built-in SPI ExpressLRS 2.4GHz receiver Built-in 5V 1A BEC Flight controller firmware target: CRAZYBEEF4SX1280 Voltage meter scale setting 110 Amperage meter scale setting 470 |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Currents: 12A continuous peak 15A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600 |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module |
Camera RunCam Nano HDZero |
Model: Racer SKU: HDZ3203 Lens: FOV D150 degree Power: 450mA@3.3v Digital: 1280*720@60fps |
VTX HDZero Whoop(TX5S.1) |
Model: HDZero Whoop SKU: HDZ3110 Frequency: 5.8G Resolution Default: 1280*720@60fps RF power: 25mw/200mw RF Connector: U.FL Interface: 4 lane MIPI CSI YUV422 Video Connector: 20 Position 0.30mm Pitch Size: 32.5mm x 32.5mm x 7mm Weight: 5.4g Power: 410mA@12V Mounting: 25.5mm*25.5mm,M2 clearance hole |
Motor | Mode: EX1102 KV9000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*16mm Weight(g):2.8g No.of Cells(Lipo):2S-3S |
Propeller | Brand Name: NewBeeDrone Model: AZI Size: 40mm Tri-blade Color: transparent Shaft size: 1.5mm |