Mobula7 1S HD 75mm Brushless BNF Aircraft with HDZero AIO5

The Mobula7 HD by Happymodel is an amazing new entry into the BNF family of 2025. It features the revolutionary AIO5 by HDZero, which is the world's first 1S flight controller with integrated HD video transmission, making it likely the most complex board in all of FPV. The camera onboard is the LUX camera, which is my personal favorite HD camera, capable of 4x3 or 16x9.  

I haven't released a video on this aircraft yet but i did talk at length about the new technology in this aircraft in my recent video on the Mobula6 HD series. I talk about the AIO5 at length, (CLICK HERE)  and show the LUX camera performance compared to other cameras, (CLICK HERE). 

24.4670g is amazing for HD!

This aircraft is the 75mm version of the Mobula6 HD Freestyle, which is a very powerful aircraft in it's own right. Add bigger motors, a bigger battery and swing a bigger prop and you get a whole lot more power and control. This whip could be flown indoors but shines as a backyard freestyle ultralight 75. 

Need some batteries?

How bout some 450s? Click here

Or maybe some 550s?? Click here

Here's what Happymodel has to say about it:

Happymodel Mobula7 Freestyle BNF is a 75mm ultra light BNF using the HDZero AIO5 designed for freestyle whooping. It is only 24.5 grams. High Speed RS0802 KV25000 brushless motors with HQPROP 1.6inch Tri-blades ultra light propellers, got a better freestyle experience.

The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.

Features:

• X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
  
• VTX Power up to 400mw
  
• ELRS V2.0 Support
  
• NEW RS0802 KV20000 motors
  
• Runcam/HDZero Lux Camera
  
• Smooth and powerful
  
• Compatible for 1S Lipo/LIHV
  
• Recommend 1S 450mah/550mah/650mah battery(Not include)

Specifications:

• Weight: 24.5g
  
• Recommended Battery: 1S 450mah/550mah/650mah
  
• Propeller Size: 40mm

AIO flight controller

• MCU: STM32F411 (100MHz, 512K Flash)
  
• Gyro: ICM42688P
  
• On board voltage and amperage meters
  
• Built-in 5A(each) BLHeli_S 4-in-1 ESC
  
• Bluejay ESC firmware pre-installed
  
• Built-in 5.8G HDZero VTX
  
• Built-in SPI ExpressLRS 2.4GHz receiver compatible with expresslrs v3.0
  
• Built-in 5V 1A BEC
  
• Board size:28.5×28.5mm with a 25.5×25.5 mounting hole size
  
• Betaflight firmware: CRAZYBEEF4SX1280 4.4.2 out of factory
  
• HDZero Lux Camera
  
• Sensor size: 1/2 inch
  
• Resolution: 720p60 4:3 and 16:9
  
• FOV: D:155° H:126° V:94°(4:3)
  
• FOV: D:145° H:126° V:70°(16:9)
  
• WDR

Motors 

• Model:RS0802
  
• Kv:25000
  
• Stator diameter: 8mm
  
• Stator length:2mm
  
• Shaft diameter: Φ1.5mm
  
• Weight:2.0g

Default port and receiver settings:

Default factory Firmware with presettings Betaflgiht 4.4.2

AIO5_BF4.4.2

Default factory dump file for betaflight 4.4.2

Betaflight 4.4.2 default factory dump for Mobula7 freestyle HD

3D Print file for Antenna fixed holder:

Antenna fixed holder for Mobula6 and Mobula7 freestyle HD