Walksnail Avatar mini 1s kit

$99.99


Delivery and Shipping

Add some general information about your delivery and shipping policies.

 AVATAR MINI 1S KIT

Features
1080P/60fps, 22ms low latency, 3.1V-5V, Power 350mW,
Built-in 8G storage, 6.8g light weight

1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.

6.8g light weight board
The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.

22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.

8G Built-in Storage
The Avatar mini 1s vtx comes with 8g built-in storage,it can record 1080p
with 60fps or 720pwith 100fps/60fps HD flight videos without interference.

Specification

 
Camera
Model    Avatar nano
Image Sensor  1/2.7”1nch
Resolution   1080P/60fps,720P/120fps,720P/60fps
Ratio       16/9  4/3
Lens  2.1mm
FOV     170°
Aperture     F2.0
Shutter Rolling  shutter
Min.Illumination   0.001Lux
Weight  3.5g
Dimensions  14*14*17mm
Coaxial Cable  55mm /90mm
VTX
Model Avatar mini 1s module
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
Mounting Holes 25.5*25.5mm
Dimensions 30*30*6.5mm
Storage 8G
Recording 1080p/720p
Weight 6.8g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-5V
Supported FC System Betaflight
OSD Canvas mode
Bitrate 25mbps 50mbps
Latency Average delay 22ms
Antenna IPEX
VTX Antenna
Model Polar antenna
Polarization LHCP
Bandwidth 5.6GHz-5.9GHz
Average Gain 2dBi
Radiation Efficiency ≥98%
VSWR ≤1.4
Connector U.FL
Line Length 90mm
Dimension H105mm*R11.2mm
Weight 1.5g
Packing List
Avatar Mini 1S KIT  X1
4 Pin USB Cable X1
6 Pin Power Cable X1
M2x3/4mm Screws  X2
M2x16mm Screws   X4
M2 Screw nut  X4
2.1x3.4x1mm Gasket   X5
Walksnail

Walksnail Avatar mini 1s kit

$99.99

 AVATAR MINI 1S KIT

Features
1080P/60fps, 22ms low latency, 3.1V-5V, Power 350mW,
Built-in 8G storage, 6.8g light weight

1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.

6.8g light weight board
The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.

22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.

8G Built-in Storage
The Avatar mini 1s vtx comes with 8g built-in storage,it can record 1080p
with 60fps or 720pwith 100fps/60fps HD flight videos without interference.

Specification

 
Camera
Model    Avatar nano
Image Sensor  1/2.7”1nch
Resolution   1080P/60fps,720P/120fps,720P/60fps
Ratio       16/9  4/3
Lens  2.1mm
FOV     170°
Aperture     F2.0
Shutter Rolling  shutter
Min.Illumination   0.001Lux
Weight  3.5g
Dimensions  14*14*17mm
Coaxial Cable  55mm /90mm
VTX
Model Avatar mini 1s module
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
Mounting Holes 25.5*25.5mm
Dimensions 30*30*6.5mm
Storage 8G
Recording 1080p/720p
Weight 6.8g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-5V
Supported FC System Betaflight
OSD Canvas mode
Bitrate 25mbps 50mbps
Latency Average delay 22ms
Antenna IPEX
VTX Antenna
Model Polar antenna
Polarization LHCP
Bandwidth 5.6GHz-5.9GHz
Average Gain 2dBi
Radiation Efficiency ≥98%
VSWR ≤1.4
Connector U.FL
Line Length 90mm
Dimension H105mm*R11.2mm
Weight 1.5g
Packing List
Avatar Mini 1S KIT  X1
4 Pin USB Cable X1
6 Pin Power Cable X1
M2x3/4mm Screws  X2
M2x16mm Screws   X4
M2 Screw nut  X4
2.1x3.4x1mm Gasket   X5
View product
×

A Message from Mr. Tiny Whoop

about Tariffs and Pricing

Hey everyone,

I’m speaking to you now both as a business owner and a member of the FPV family we've built together.

For almost ten years now, I’ve been doing everything I can to keep Tiny Whoop prices steady, even as costs started to rise. But with the newest wave of tariffs—more than doubling the cost of nearly every part we import from China—that fight has hit a wall.

Lots of you have already noticed some prices going up across the site. This isn’t a price hike to chase profit. It’s survival mode. Like everyone in the FPV industry right now, I’m facing a set of changes that hit fast and hard. Nearly everything we source from China now costs us more than double.

For an irresponsibly long time I ate the costs of the tariffs, but the math doesn’t work anymore without putting Tiny Whoop at serious risk.

So here’s what I want you to know:
Every price increase is a response to real, unavoidable costs.
Even with the price increases I’m taking a big hit.
When this pressure eases, I’ll roll back prices immediately.

If you have any questions or ideas it would mean a lot to hear from you!

We’re still shipping every day, still guaranteeing satisfaction on all orders. But this is the toughest moment Tiny Whoop has faced in nearly a decade.

Through all of this, my mission hasn’t changed. I’m still committed to helping people experience the gift of flight, to keeping TinyWhoop.com on the leading edge of innovation, and to making sure the magic of Tiny Whoop doesn’t get swallowed up by politics and global economics.

If you’ve been a part of this ride in any way, I am so, so grateful! Thank you for supporting Tiny Whoop, thank you for supporting my family, and thank you for being a part of this amazing community!

— Jesse Perkins
Founder, Tiny Whoop