Mobula7 HDZero 2-3S 75mm BNF FRSKY

$149.99 $199.99


Delivery and Shipping

Add some general information about your delivery and shipping policies.

This was the first 75mm HDZero BNF released by Happymodel. It runs on 2S or 3S, and is only available in FRSKY edition at this point, as it has been discontinued. 

Here's the original description:

HDZero has officially teamed up with Happymodel to bring you another top-of-the-line competitor in the 75mm brushless whoop lineup... the HDZero Mobula7!

This FPV Racing whoop is equipped with built-in ExpressLRS capabilities, as well as a RunCam HDZero Nano Camera and the all-new HDZero Whooop VTX for a smooth and powerful flight!

Specifications:
Brand Name: HDZERO and HappyModel Co-branded
Model: Mobula7 HDZERO
Frame wheelbase: 75mm
Weight: 41gram without battery
Size: 98mm*98mm*50mm
Radio Link System required: ExpressLRS 2.4GHz TX module 2.0 ELRS firmware
Compatible with 2S-3S Lipo battery or Lihv battery
Recommend Battery: 2S 300/350/450/550/650 mAh
3s 300/350/450 mAh
Battery Plug: XT30
Battery holder tray size: 17mm*13mm

Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Mount pattern: 25.5×25.5 M2
Power supply: 2-4S Lipo battery
Built-in 12A Blheli_s ESC each
Built-in Betaflight OSD(SPI Control)
Built-in SPI ExpressLRS 2.4GHz receiver
Built-in 5V 1A BEC
Flight controller firmware target: CRAZYBEEF4SX1280
Voltage meter scale setting 110
Amperage meter scale setting 470
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Currents: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module
Camera
RunCam Nano HDZero
Model: Racer
SKU: HDZ3203
Lens: FOV D150 degree
Power: 450mA@3.3v
Digital: 1280*720@60fps
VTX  
HDZero Whoop(TX5S.1)
 
Model: HDZero Whoop
SKU: HDZ3110
Frequency: 5.8G
Resolution Default: 1280*720@60fps
RF power: 25mw/200mw
RF Connector: U.FL
Interface: 4 lane MIPI CSI YUV422
Video Connector: 20 Position 0.30mm Pitch
Size: 32.5mm x 32.5mm x 7mm
Weight: 5.4g
Power:  410mA@12V
Mounting: 25.5mm*25.5mm,M2 clearance hole
Motor Mode: EX1102 KV9000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S
Propeller Brand Name: NewBeeDrone
Model: AZI
Size: 40mm
Tri-blade
Color: transparent
Shaft size: 1.5mm
EXTINCT

Mobula7 HDZero 2-3S 75mm BNF FRSKY

$149.99 $199.99

This was the first 75mm HDZero BNF released by Happymodel. It runs on 2S or 3S, and is only available in FRSKY edition at this point, as it has been discontinued. 

Here's the original description:

HDZero has officially teamed up with Happymodel to bring you another top-of-the-line competitor in the 75mm brushless whoop lineup... the HDZero Mobula7!

This FPV Racing whoop is equipped with built-in ExpressLRS capabilities, as well as a RunCam HDZero Nano Camera and the all-new HDZero Whooop VTX for a smooth and powerful flight!

Specifications:
Brand Name: HDZERO and HappyModel Co-branded
Model: Mobula7 HDZERO
Frame wheelbase: 75mm
Weight: 41gram without battery
Size: 98mm*98mm*50mm
Radio Link System required: ExpressLRS 2.4GHz TX module 2.0 ELRS firmware
Compatible with 2S-3S Lipo battery or Lihv battery
Recommend Battery: 2S 300/350/450/550/650 mAh
3s 300/350/450 mAh
Battery Plug: XT30
Battery holder tray size: 17mm*13mm

Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Mount pattern: 25.5×25.5 M2
Power supply: 2-4S Lipo battery
Built-in 12A Blheli_s ESC each
Built-in Betaflight OSD(SPI Control)
Built-in SPI ExpressLRS 2.4GHz receiver
Built-in 5V 1A BEC
Flight controller firmware target: CRAZYBEEF4SX1280
Voltage meter scale setting 110
Amperage meter scale setting 470
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Currents: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module
Camera
RunCam Nano HDZero
Model: Racer
SKU: HDZ3203
Lens: FOV D150 degree
Power: 450mA@3.3v
Digital: 1280*720@60fps
VTX  
HDZero Whoop(TX5S.1)
 
Model: HDZero Whoop
SKU: HDZ3110
Frequency: 5.8G
Resolution Default: 1280*720@60fps
RF power: 25mw/200mw
RF Connector: U.FL
Interface: 4 lane MIPI CSI YUV422
Video Connector: 20 Position 0.30mm Pitch
Size: 32.5mm x 32.5mm x 7mm
Weight: 5.4g
Power:  410mA@12V
Mounting: 25.5mm*25.5mm,M2 clearance hole
Motor Mode: EX1102 KV9000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S
Propeller Brand Name: NewBeeDrone
Model: AZI
Size: 40mm
Tri-blade
Color: transparent
Shaft size: 1.5mm
View product