Reinforced Nylon Lightweight Replacement Screw Set (PEEK)

$8.99

Delivery and Shipping

Add some general information about your delivery and shipping policies.

For the gram-pinchers in the brushless world, check out these excellent replacement screws that will save your build around a half a gram!

PEEK is thermoplastic super engineered plastic superior in physical and chemical properties. It is highly heat-resistant, water-proof, and high temperature strength is retained. Features outstanding friction, shock, and fatigue, resistance.  

They may seem expensive for teeny tiny screws, but this material is the result of years of testing in the medical industry and is the lightest, strongest solution to metal screws holding your brushless motors. Believe it or not, this material is much cheaper than most performance plastics.

These screws are made of 50% glass reinforced nylon (as opposed to the usual 30% glass), making them much stronger than all other fiber-reinforced polymers.  I'm not a plastics expert, but I'm told this is the strongest plastic available on the planet. 

This particular blend of reinforced nylon will not absorb moisture like most nylon screws, making hold its dimensions in a much wider range of humidity levels and temperatures. That means if you install your motors in a moist climate then come to dry Colorado to fly with me your screws will hold their shape and strength! These screws will not melt until they reach 260°F. 

After weeks of testing, we here at Tiny Whoop have found that they can indeed be broken after repeated hard crashes, tho seldom, which is why you will get an extra  screw. You also have to be a little careful installing them, if you twist them in too hard it's possible to snap off the top of the screw, but so far whenever that has happened to me the screw still holds the motor tight.  

These kits come with 13 M1.4x4mm reinforced nylon screws, which will fit most 65mm and 75mm brushless builds, and all of the brushless frames found on TinyWhoop.com.

If you are wanting to use this screw to mount your canopy to your frame make sure that you first thread in a metal screw. This will cut threads into the frame mounting posts and allow you to screw in the PEEK screw easier. Be careful about it still and don't torque it too hard or you can break off the head of the screw.

 

Our Collections

NBK

Reinforced Nylon Lightweight Replacement Screw Set (PEEK)

$8.99

For the gram-pinchers in the brushless world, check out these excellent replacement screws that will save your build around a half a gram!

PEEK is thermoplastic super engineered plastic superior in physical and chemical properties. It is highly heat-resistant, water-proof, and high temperature strength is retained. Features outstanding friction, shock, and fatigue, resistance.  

They may seem expensive for teeny tiny screws, but this material is the result of years of testing in the medical industry and is the lightest, strongest solution to metal screws holding your brushless motors. Believe it or not, this material is much cheaper than most performance plastics.

These screws are made of 50% glass reinforced nylon (as opposed to the usual 30% glass), making them much stronger than all other fiber-reinforced polymers.  I'm not a plastics expert, but I'm told this is the strongest plastic available on the planet. 

This particular blend of reinforced nylon will not absorb moisture like most nylon screws, making hold its dimensions in a much wider range of humidity levels and temperatures. That means if you install your motors in a moist climate then come to dry Colorado to fly with me your screws will hold their shape and strength! These screws will not melt until they reach 260°F. 

After weeks of testing, we here at Tiny Whoop have found that they can indeed be broken after repeated hard crashes, tho seldom, which is why you will get an extra  screw. You also have to be a little careful installing them, if you twist them in too hard it's possible to snap off the top of the screw, but so far whenever that has happened to me the screw still holds the motor tight.  

These kits come with 13 M1.4x4mm reinforced nylon screws, which will fit most 65mm and 75mm brushless builds, and all of the brushless frames found on TinyWhoop.com.

If you are wanting to use this screw to mount your canopy to your frame make sure that you first thread in a metal screw. This will cut threads into the frame mounting posts and allow you to screw in the PEEK screw easier. Be careful about it still and don't torque it too hard or you can break off the head of the screw.

 

View product
Back to top
×

A Message from Mr. Tiny Whoop

about Tariffs and Pricing

Hey everyone,

I’m speaking to you now both as a business owner and a member of the FPV family we've built together.

For almost ten years now, I’ve been doing everything I can to keep Tiny Whoop prices steady, even as costs started to rise. But with the newest wave of tariffs—more than doubling the cost of nearly every part we import from China—that fight has hit a wall.

Lots of you have already noticed some prices going up across the site. This isn’t a price hike to chase profit. It’s survival mode. Like everyone in the FPV industry right now, I’m facing a set of changes that hit fast and hard. Nearly everything we source from China now costs us more than double.

For an irresponsibly long time I ate the costs of the tariffs, but the math doesn’t work anymore without putting Tiny Whoop at serious risk.

So here’s what I want you to know:
Every price increase is a response to real, unavoidable costs.
Even with the price increases I’m taking a big hit.
When this pressure eases, I’ll roll back prices immediately.

If you have any questions or ideas it would mean a lot to hear from you!

We’re still shipping every day, still guaranteeing satisfaction on all orders. But this is the toughest moment Tiny Whoop has faced in nearly a decade.

Through all of this, my mission hasn’t changed. I’m still committed to helping people experience the gift of flight, to keeping TinyWhoop.com on the leading edge of innovation, and to making sure the magic of Tiny Whoop doesn’t get swallowed up by politics and global economics.

If you’ve been a part of this ride in any way, I am so, so grateful! Thank you for supporting Tiny Whoop, thank you for supporting my family, and thank you for being a part of this amazing community!

— Jesse Perkins
Founder, Tiny Whoop