ITS HERE!
The Happymodel Mobula6 Freestyle HD BNF is the first 65mm HD brushless tiny whoop that weighs less than 19.6g. With tiny whoops, every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video!
Focusing on freestyle flying, this whoop includes the Runcam HDZero Lux camera and a vibration-free fixed angle 25deg camera mount. The camera features a ½ inch CMOS sensor that delivers sharp image quality and excellent low-light performance. Lux camera has Wide Dynamic Range (WDR) and offers higher quality by oversampling (1080p ‐> 720p). The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability.
Optimized for a 4:3 aspect ratio, it can also be configured for a 16:9 aspect ratio with a reduced vertical FOV. The camera boasts a large 94-degree vertical FOV, ideal for fast indoor and outdoor proximity flying. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for.
Grab Spare mounts for this camera HERE
Specifications
-
Weight: 19.9g
-
Recommended Battery: 1S 300mAh
-
Propellor Size: 31mm
-
AIO
-
MCU: STM32F411 (100MHz, 512K Flash)
-
Gyro: BMI270
-
On board voltage and amperage meters
-
Built-in 5A(each) BLHeli_S 4-in-1 ESC
-
Built-in 5.8G HDZero VTX
-
Built-in SPI ExpressLRS 2.4GHz receiver
-
Built-in 5V 1A BEC
-
Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size
-
HDZero Lux Camera
-
Sensor size: 1/3 inch
-
Resolution: 720p60 4:3 and 16:9
-
FOV: D:155° H:126° V:94°(4:3)
-
FOV: D:145° H:126° V:82°(16:9)
-
Motors
-
Kv:28000
-
Stator diameter: 7mm
-
Stator length:2mm
-
Shaft diameter: Φ1mm
-
Weight:1.5g
Included
-
1x Happymodel Mobula6 Freestyle HD BNF
-
1x Spare canopy
-
1x Spare propeller(set)
-
1x Screw driver
1x propeller disassemble tool