1 4

Happymodel Mobula6 Freestyle HD BNF

$299.99

Delivery and Shipping

Add some general information about your delivery and shipping policies.

CLICK HERE TO WATCH THIS VIDEO ON YOUTUBE!

The Happymodel Mobula6 Freestyle HD BNF is the latest 65mm HD brushless Whoop by Happymodel that weighs less than 19.6g. Every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video!

Focusing on freestyle flying, this whoop includes the Runcam HDZero Lux camera and a vibration-free fixed angle 25deg camera mount. The camera features a ½ inch CMOS sensor that delivers sharp image quality and excellent low-light performance. Lux camera has Wide Dynamic Range (WDR) and offers higher quality by oversampling (1080p ‐> 720p). The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability.

Optimized for a 4:3 aspect ratio, it can also be configured for a 16:9 aspect ratio with a reduced vertical FOV. The camera boasts a large 94-degree vertical FOV, ideal for fast indoor and outdoor proximity flying. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for.

Grab Spare mounts for this camera HERE


 Specifications

  • Weight: 19.9g

  • Recommended Battery: 1S 300mAh

  • Propellor Size: 31mm

  • AIO

  • MCU: STM32F411 (100MHz, 512K Flash)

  • Gyro: BMI270

  • On board voltage and amperage meters

  • Built-in 5A(each) BLHeli_S 4-in-1 ESC 

  • Built-in 5.8G HDZero VTX 

  • Built-in SPI ExpressLRS 2.4GHz receiver

  • Built-in 5V 1A BEC 

  • Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size

  • HDZero Lux Camera

    • Sensor size: 1/3 inch

    • Resolution: 720p60 4:3 and 16:9

    • FOV: D:155° H:126° V:94°(4:3)

    • FOV: D:145° H:126° V:82°(16:9)

  • Motors

    • Kv:28000

    • Stator diameter: 7mm

    • Stator length:2mm

    • Shaft diameter: Φ1mm

    • Weight:1.5g

Included

  • 1x Happymodel Mobula6 Freestyle HD BNF

  • 1x Spare canopy

  • 1x Spare propeller(set)

  • 1x Screw driver

1x propeller disassemble tool

Our Collections

Happymodel

Happymodel Mobula6 Freestyle HD BNF

$299.99

CLICK HERE TO WATCH THIS VIDEO ON YOUTUBE!

The Happymodel Mobula6 Freestyle HD BNF is the latest 65mm HD brushless Whoop by Happymodel that weighs less than 19.6g. Every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video!

Focusing on freestyle flying, this whoop includes the Runcam HDZero Lux camera and a vibration-free fixed angle 25deg camera mount. The camera features a ½ inch CMOS sensor that delivers sharp image quality and excellent low-light performance. Lux camera has Wide Dynamic Range (WDR) and offers higher quality by oversampling (1080p ‐> 720p). The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability.

Optimized for a 4:3 aspect ratio, it can also be configured for a 16:9 aspect ratio with a reduced vertical FOV. The camera boasts a large 94-degree vertical FOV, ideal for fast indoor and outdoor proximity flying. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for.

Grab Spare mounts for this camera HERE


 Specifications

Included

1x propeller disassemble tool

View product
Back to top
×

A Message from Mr. Tiny Whoop

about Tariffs and Pricing

Hey everyone,

I’m speaking to you now both as a business owner and a member of the FPV family we've built together.

For almost ten years now, I’ve been doing everything I can to keep Tiny Whoop prices steady, even as costs started to rise. But with the newest wave of tariffs—more than doubling the cost of nearly every part we import from China—that fight has hit a wall.

Lots of you have already noticed some prices going up across the site. This isn’t a price hike to chase profit. It’s survival mode. Like everyone in the FPV industry right now, I’m facing a set of changes that hit fast and hard. Nearly everything we source from China now costs us more than double.

For an irresponsibly long time I ate the costs of the tariffs, but the math doesn’t work anymore without putting Tiny Whoop at serious risk.

So here’s what I want you to know:
Every price increase is a response to real, unavoidable costs.
Even with the price increases I’m taking a big hit.
When this pressure eases, I’ll roll back prices immediately.

If you have any questions or ideas it would mean a lot to hear from you!

We’re still shipping every day, still guaranteeing satisfaction on all orders. But this is the toughest moment Tiny Whoop has faced in nearly a decade.

Through all of this, my mission hasn’t changed. I’m still committed to helping people experience the gift of flight, to keeping TinyWhoop.com on the leading edge of innovation, and to making sure the magic of Tiny Whoop doesn’t get swallowed up by politics and global economics.

If you’ve been a part of this ride in any way, I am so, so grateful! Thank you for supporting Tiny Whoop, thank you for supporting my family, and thank you for being a part of this amazing community!

— Jesse Perkins
Founder, Tiny Whoop